SuperServer E200-9AP User's Manual 3.3 Ports 3 1 6 2 10 5 4 9 8 7 Figure 3-1. Rear input/Output Ports DP and HDMI Ports One HDMI and one DisplayPort are used to display both high definition video and digital sound through an HDMI or DP-capable display, using a single HDMI or DP cable (not included). The A2SAV-L supports HDMI Specification version 1.4b and DP 1.1a via N3700 processor graphics controller. LAN Ports Two LAN ports (LAN1, LAN2) are located on the I/O back panel. They accept RJ45 type cables. Universal Serial Bus (USB) Ports There are two USB 2.0 ports (USB0/1) and two USB 3.0 ports (USB2/3) located on the I/O back panel.
The motherboard also has a header for two USB 2.0 ports (USB8/9). The onboard headers can be used to provide front side USB access with a cable (not included). Serial Ports There is one COM port (COM1) on the I/O back panel using an RJ45 connector, and two COM headers (COM2, COM3) on the motherboard. COM2 supports RS-232 and COM3 supports RS-485 only. 30 Rear I/O Ports # Description # Description 1. DisplayPort 6. USB1 2. HDMI 7. USB0 3 COM1 8 LAN1 4 USB2 9 LAN2 5. USB3 10 VGA