SuperServer E200-9AP User's Manual 3.5 LED Indicators LAN1, LAN2 LEDs The Ethernet ports each have two LEDs. The Activity LED indicates network activity when flashing. The Link LED may be green, amber or off to indicate the speed of the connection. Activity LED Link LED Power LED S3 Blink Function LED1 is the power LED S3 blink function LED. If the system enters the S3 mode, LED1 will blink. Power LED LED2 is the Power LED. When lit, power is present on the motherboard. Be sure to turn off the system and unplug the power cords before removing or installing components. Standby Power LED LED3 is the standby power LED. When lit, the system is in standby mode.
34 LAN1/2 LEDs (Connection Speed Indicator) LED Color Definition Off 10 Mb/s or none Green 100 Mb/s Amber 1 Gb/s Power LED S3 Blink Indicator LED Color Definition Blinking Green S3 Mode Off System Off (power cable not connected) Solid Green System Power On Power LED Indicator LED Color Definition Off System Off Blue System On Standby Power LED Indicator LED Color Definition On 5V Standby Power Ready Off 5V Standby Power off (can enter deep sleep mode)