Supermicro SuperServer E200-9AP — Supermicro SuperServer E200-9AP User's Manual (Revision 1.0) PDF Download

Chapter 5: BIOS P-State coordination type for all software installed in the system. Select SW_ANY to change the P-State coordination type for a software program in the system. The options are HW_All , SW_ALL, and SW_ANY. Chipset Warning: Setting the wrong values in the following sections may cause the system to malfunc­ tion. North Bridge The following memory information will be displayed: Memory Slot 0 Memory Slot 1 Max TOLUD This feature sets the maximum TOLUD value, which specifies the "Top of Low Usable DRAM" memory space to be used by internal graphics devices, GTT Stolen Memory, and TSEG, respectively, if these devices are enabled.

The options are 2 GB , 2.25 GB, 2.5 GB, 2.75 GB, and 3 GB. Graphics Configuration GOP Configuration GOP Driver The Graphics Output Protocol (GOP) driver is a replacement for legacy video BIOS that accesses UEFI protocols. The options are Enable and Disable. IGFX Graphic Output Use this feature to select the supported IGFX graphics device output to the EDP panel or VGA morning. The options are VGA and Embedded Display IGD Configuration Integrate Graphics Device When enabled, the onboard graphics device will be used as the primary video display. The options are Disable and Enable . Primary Display Use this feature to select the primary video display. The options are IGD and PCIe.

RC6 (Render Standby) Select Enabled to enable render standby support. The options are Disabled and Enabled . 43