Supermicro SuperServer E200-9AP — Supermicro SuperServer E200-9AP User's Manual (Revision 1.0) PDF Download

SuperServer E200-9AP User's Manual PCI Device ID This item displays the device ID number. PCI Address This item displays the PCI address for this computer. PCI addresses are three two-digit hexadecimal numbers. Link Status This item displays the connection status. MAC Address This item displays the MAC address for this computer. Mac addresses are six two-digit hexadecimal numbers. Virtual MAC Address This item displays the Virtual MAC address for this computer. Mac addresses are six two-digit hexadecimal numbers. Intel I210 Gigabit Network Connection - 0C:C4:7A:88:4D:F5 NIC Configuration Link Speed This feature allows the user to specify the port speed used for the selected boot protocol.

The options are Auto Negotiated , 10 Mbps Half, 10 Mbps Full, 100 Mbps Half, and 100 Mbps Full. Wake On LAN Select Enabled for Wake_On_LAN support, which will allow the system to "wake up" when an onboard device receives an incoming signal. The options are Disabled and Enabled. Blink LEDs Use this feature to identify the physical network port by blinking the associated LED. Use the keybaord to select a value. UEFI Driver This item displays the UEFI driver version. Adapter PBA This item displays the Processor Bus Adapter (PBA) model number. The PBA number is a nine digit number (i.e., 010B00-000) located near the serial number. Device Name This item displays the adapter device name. 56