SuperServer E200-9AP User's Manual 7. Using a different system, extract the BIOS package into a bootable USB flash drive. 8. When the DOS prompt appears, enter AMI.BAT BIOSname.###. Note: Do not interrupt this process until BIOS flashing has completed. 9. After receiving the message that the BIOS update is complete, unplug the AC power cable from the power supply to clear CMOS, then plug the AC power cable in the power supply again to power on the system. 10. Press continuously to enter the BIOS Setup utility. 11. Press to load the default settings. 12. After loading the default settings, press to save the settings and exit the BIOS Setup utility. 90