Chapter 1: Introduction 11 Jumper Description Default Setting JBT1 CMOS Clear Open (Normal); Short: Clear CMOS JI2C1/JI2C2 SMB to PCI-E Slots Enable/Disable Pins 1-2 (Enabled) JPAC1 Audio Enable Pins 1-2 (Enabled) JPG1 VGA Enable/Disable Pins 1-2 (Enabled) JPME2 Manufacturing Mode Pins 1-2 (Normal) JWD1 Watch Dog Timer Pins 1-2 (Reset) LED Description Status LED1 CPU Power LED Blue On: Power On LED2 Standby Power LED Green On: Power On LED3 Main Power LED Green On: Power On LEDBMC BMC Heartbeat LED Blinking Green:
BMC Normal Connector Description AUDIO FP Audio Front Panel Header BT1 Onboard Battery COM1/COM2 Serial COM Headers FAN1/FAN2 System/CPU Fan Headers HDMI/DP Back Panel High Definition Multimedia Interface/DisplayPort IPMI LAN IPMI Dedicated LAN Port _ I-SATA0/I-SATA1 Intel PCH SATA 3.0 Ports (I-SATA1 supports SuperDOM) JGP1 General Purpose I/O Headers JD2 External Speaker Header JF1 Front Panel Control Header JIPMB1 4-pin BMC External I2C Header JL1 Chassis Intrusion Header JPW1 24-pin ATX Power Connector 4-pin 12V Power Connector (Optional Power Source when the 24-pin ATX power is not JPW2 in use) JSATA1 4-pin Connector for HDD use (to provide power from the motherboard to onboard devices) JSD1 SATA DOM Power Connector JSTBY1 Standby Power Header JTPM1 Trusted Platform Module/Port 80 Connector LAN1 ~ LAN4 LAN (RJ45) Ports (-F with dual LAN only) mSATA/miniPCI-E mSATA/mini-PCI-E Connector SLOT1 CPU Slot PCI-E 2.0 X1 (IN X8) SRW1/SRW2 mSATA Holding Screws USB0/1 Back panel Universal Serial Bus (USB) 2.0 Ports USB2/3 Back Panel USB 3.0 Ports USB4 USB Type A Header USB5/6, USB7/8 Front Panel USB 2.0 Headers