SuperServer E200-9B User's Manual 2.2 Accessing the System The SC101S features a removable top cover to access to the inside of the chassis. 2 Cover Hook Cover Hook 3 Figure 2-1. Removing the Chassis Cover Removing the Top Cover 1. Power down the system as described in section 3.1. 2. Remove the two side screws that hold the chassis cover in place and set these aside for later use. 3. Slide the cover sideways as illlustrated above to release the front and rear cover hooks from the chassis. 4. Lift the cover up and off the chassis. Caution: Except for short periods of time, do not operate the server without the cover in place.
The chassis cover must be in place to allow proper airflow and prevent overheating . 16