Supermicro SuperServer E200-9B — Supermicro SuperServer E200-9B User & Service Manual PDF

SuperServer E200-9B User's Manual 4-pin 12V Power Connector JPW2 is the 12V DC power connector that provides alternative single power source for special enclosure when the 24-pin ATX power is not in use. 3 1 4 JPW2 Pin Layout 2 Required Connection Note 1: The 12V DC input is limited to 12A by design. It provides up to 144W power input to the motherboard. Please keep onboard power use within the power limits specified above. Over-current DC power use may cause damage to the motherboard. Note 2: Do not use the 4-pin DC power at JPW2 when the 24-pin ATX Power at JPW1 is connected to the power supply. Do not plug in both JPW1 and JPW2 at the same time..

3.2 Headers and Connectors Fan Headers There are two 4-pin fan headers on the motherboard. Although pins 1-3 of the fan headers are backward compatible with the traditional 3-pin fans, we recommend you use 4-pin fans to take advantage of the fan speed control via Pulse Width Modulation through the BMC. This allows the fan speeds to be automatically adjusted based on the motherboard temperature. External Speaker The JD2 header is for the external speaker. If you wish to use an external speaker, connect its cable to pins 1-4.

24 +12V 4-pin Power Pin Definitions Pin# Definition 1 - 2 Ground 3 - 4 +12V Fan Header Pin Definitions Pin# Definition 1 Ground (Black) 2 +12V (Red) 3 Tachometer 4 PWM Control External Speaker Connector Pin Definitions Pin Setting Definition Pins 1-4 Speaker