SuperServer E200-9B User's Manual Trusted Computing Configuration Security Device Support If this feature and the TPM jumper on the motherboard are both set to Enabled, onbaord security devices will be enabled for TPM (Trusted Platform Module) support to enhance data integrity and network security. Please reboot the system for a change on this setting to take effect. The options are Disabled and Enabled . TPM State This feature changes the TPM State. The options are Disabled and Enabled . Note: The system will restart to change the TPM State. Pending TPM operation Use this item to schedule a TPM-related operation to be performed by a security device for system data integrity.
Your system will reboot to carry out a pending TPM operation. The options are None and TPM Clear. Device Select Use this feature to select the TPM version. TPM 1.2 will restrict support to TPM 1.2 devices. TPM 2.0 will restrict support for TPM 2.0 devices. Select Auto to enable support for both versions. The default setting is Auto . The following are informational status messages that indicate the current TPM State: TPM Enabled Status TPM Active Status TPM Owner Status iSCSi Configuration iSCSI Initiator Name This feature allows the user to enter the unique name of the iSCSI Initiator in IQN format.
Once the name of the iSCSI Initiator is entered into the system, configure the proper settings for the following items. Add an Attempt Delete Attempts Change Attempt order 54