Supermicro SuperServer E300-8D — Supermicro SuperServer E300-8D User's Manual (Revision 1.0c) PDF

SuperServer E300-8D User's Manual 2.4 Chassis Components Installing the Storage Drive The SCE300 can accommodate a single fixed 2.5" storage drive of 9.5 mm thickness. It is installed to a mounting tray inside the chassis. Use an enterprise quality drive. Figure 2-4. Installing the Hard Drive Installing the Hard Drive The motherboard should be installed before installing the drive. 1. Make sure there is no power to the system as described in section 2.1 and remove the chassis cover. 2. Remove the screws securing the hard drive tray to the support bracket and set them aside for later use. Lift the tray out. 3.

Place the drive into the tray and secure it to the tray with the screws provided with drive. 24