Chapter 3 Motherboard Connections Chapter 3 Motherboard Connections This section describes the connections on the X10SDV-TP8F motherboard and provides pinout definitions. Note that depending on how the system is configured, not all connections are required. The LEDs on the motherboard are also described here. A motherboard layout indicating component locations may be found in Chapter 1. Please review the Safety Precautions in Appendix A before installing or removing components. 3.1 Power Connections ATX PWR, DC PWR and HDD PWR Connectors (JPW1, JPV1, JPH1) The 24-pin ATX power connector header (JPW1) provides power to the motherboard.
The 12V DC power connector (JPV1) provides alternative power for a special enclosure when the 24-pin ATX power is not in use. (Do not use both.) The 4-pin power connector (JPH1) provides power to onboard HDD devices. Note : Do not use the 8-pin DC power at JPV1 when the 24-pin ATX Power at JPW1 is connected to the power supply.
Do not plug in both 5 1 8 4 27 ATX Power 24-pin Connector Pin Definitions Pin# Definition Pin# Definition 13 +3.3V 1 +3.3V 14 NC 2 +3.3V 15 Ground 3 Ground 16 PS ON _ 4 +5V 17 Ground 5 Ground 18 Ground 6 +5V 19 Ground 7 Ground 20 Res (NC) 8 PWR OK _ 21 +5V 9 5VSB 22 +5V 10 +12V 23 +5V 11 +12V 24 Ground 12 +3.3V 8-pin DC Power Pin Definitions (JPV1) Pin# Definition 1-4 GND 5-8 12V JPV1 and JPW1 at the same time. 4 1 4-Pin HDD Power Pin Definitions (J6) Pin# Definition 1 12V 2-3 GND 4 5V