SuperServer E300-8D User's Manual If the above is set to Disable, Energy Performance BIAS Setting will display: Energy Performance BIAS Setting This feature allows balancing Power Efficiency vs Performance. This will override whatever setting is in the Operating System. The options are Performance, Balanced Performance , Balanced Power, and Power. Power/Performance Switch This feature allows dynamic switching between Power and Performance power efficiency. The options are Disable and Enable . Workload Configuration This feature allows for optimization of workload. Balanced is recommended. The options are Balanced and I/O Sensitive. Program PowerCTL_MSR PKG C-state Lat. Neg.
Use this feature to indicate whether latency should be negotiated with PCH for packaging C-States. The options are Enable and Disable. SAPM Control This feature indicates whether the PCU should control the System Agent PM using its power-performance tuning algorithm. The options are Enable and Disable. Energy Efficient Turbo Use this feature to enable energy efficient turbo mode. The options are Enable and Disable. DRAM RAPL Configuration Override BW_LIMIT_TF This feature allows the user to turn off the "Override BW_LIMIT_TF (Time Frame)" setting when the item "Running Average Limit for DRAM modules" (DRAM RAPL) is set to Enabled so that the DRAM RAPL setting can work properly.
The default setting is 1 . DRAM RAPL Extended Range Use this feature to set the DRAM Running Average Power Limit (RAPL) Extended Range. The options are Disable and Enable . 54