Supermicro SuperServer E300-8D — Supermicro SuperServer E300-8D User's Manual (Revision 1.0c) PDF

SuperServer E300-8D User's Manual Intel VT for Directed I/O (VT-d) Intel VT for Directed I/O (VT-d) Select Enable to use Intel Virtualization Technology support for Direct I/O VT-d support by reporting the I/O device assignments to the VMM (Virtual Machine Monitor) through the DMAR ACPI Tables. This feature offers fully-protected I/O resource sharing across Intel platforms, providing greater reliability, security and availability in networking and data sharing. The options are Enable and Disable. ACS Control Use this feature to program Access Control Services (ACS) to the PCI-E Root Port Bridges. The options are Enable and Disable.

Interrupt Remapping Select Enable for Interrupt Remapping support to enhance system performance. The options are Enable and Disable. Memory Configuration Enforce POR Select Enable to enforce POR restrictions on DDR4 frequency and voltage programming. The options are Enabled and Disabled. Memory Frequency Use this feature to set the maximum memory frequency for onboard memory modules. The options are Auto , 1333, 1400, 1600, 1800, 1867, 2000, 2133, 2200, 2400, 2600, 2667, 2800, 2993, 3000, 3200, and Reserved (Do not select Reserved). Data Scrambling Select Enabled to enable data scrambling to enhance system performance and data integrity. The options are Auto , Disabled, and Enabled.

DRAM RAPL Baseline Use this feature to set the run-time power-limit baseline for DRAM modules. The options are Disable, DRAM RAPL Mode 0, and DRAM RAPL Mode 1 . Set Throttling Mode Throttling improves reliability and reduces power consumption in the processor via automatic voltage control during processor idle states. The options are Disabled and CLTT (Closed Loop Thermal Throttling). A7 Mode Select Enabled to support the A7 (Addressing) mode to improve memory performance. The options are Enable and Disable. 56