Supermicro SuperServer E300-8D — Supermicro SuperServer E300-8D User's Manual (Revision 1.0c) PDF

SuperServer E300-8D User's Manual *If the item "Configure SATA as" is set to IDE, the following items will display: SATA Frozen Use this item to enable the HDD Security Frozen Mode. The options are Disabled and Enabled. Port 0 ~ Port 5 SATA Device Type (Available when a SATA port is detected) Use this item to specify if the SATA port specified by the user should be connected to a Solid State drive or a Hard Disk Drive. The options are Hard Disk Drive and Solid State Drive. Server ME (Management Engine) Configuration This feature displays the following system ME configuration settings.

General ME Configuration Operational Firmware Version ME Firmware Type Recovery Firmware Version ME Firmware Features ME Firmware Status #1 ME Firmware Status #2 Current State Error Code PCIe/PCI/PnP Configuration The following information will display: PCI Bus Driver Version PCI Devices Common Settings: PCI PERR/SERR Support Select Enabled to allow a PCI device to generate a PERR/SERR number for a PCI Bus Signal Error Event. The options are Enabled and Disabled . Above 4G Decoding (Available if the system supports 64-bit PCI decoding) Select Enabled to decode a PCI device that supports 64-bit in the space above 4G Address. The options are Disabled and Enabled. 60