Supermicro SuperServer E300-8D — Supermicro SuperServer E300-8D User's Manual (Revision 1.0c) PDF

SuperServer E300-8D User's Manual Onboard LAN1 Option ROM Use this option to select the type of device installed in LAN Port1 used for system boot. The default setting for LAN1 Option ROM is PXE . Onboard LAN2 ~ LAN8 Option ROM Use this option to select the type of device installed in the specified LAN Ports used for system boot. The options are Disabled and PXE. Onboard Video Option ROM Use this item to select the Onboard Video Option ROM type. The options are Disabled, Legacy, and EFI. VGA Priority This feature allows the user to select the graphics adapter to be used as the primary boot device. The options are Onboard and Offboard.

Network Stack Select Enabled enable PXE (Preboot Execution Environment) or UEFI (Unified Extensible Firmware Interface) for network stack support. The options are Enabled and Disabled . *If "Network Stack" is set to Enabled, the four items below will become available for configuration: IPv4 PXE Support Select Enabled to enable IPv4 PXE boot support. The options are Disabled and Enabled . IPv6 PXE Support Select Enabled to enable IPv6 PXE boot support. The options are Disabled and Enabled. PXE boot wait time Use this option to specify the wait time to press the ESC key to abort the PXE boot. Press "+" or "-" on your keyboard to change the value. The default setting is 0 .

Media detect count Use this option to specify the number of times media will be checked. Press "+" or "-" on your keyboard to change the value. The default setting is 1 . Super IO Configuration Super IO Chip AST2400 Serial Port 1 Configuration This submenu allows the user the configure settings of Serial Port 1 or Serial Port 2. 62