Supermicro SuperStorage Server 2028R-E1CR48(N/L) — Supermicro SuperStorage Server 2028R-E1CR48(N/L) User Manual PDF

Chapter 7: AMI BIOS on the system configuration. Select Disabled to disable ASPM support. The options are Disabled and Auto. Warning : Enabling ASPM support may cause some PCI-E devices to fail! MMIOHBase Use this item to select the I/O base memory size according to memory-address mapping for the PCH chip. The base memory size must be between 4032G to 4078G. The options are 56TB , 40TB, 24T, 3T, 2T, and 1TB. MMIO High Size Use this item to select the high I/O memory size according to memory-address mapping for the PCH chip. The options are 256G , 128G, 512G, and 1024G.

PCI Devices Option ROM Settings CPU2 PCI-E 3.0x8 Slot1 OPROM/CPU2 PCI-E 3.0x16 Slot2 OPROM/CPU2 PCI-E 3.0x16 Slot3 OPROM/CPU1 SAS AOM1 (Add-On Module#1) Slot4 OPROM/CPU1 SIOM Card Slot5 OPROM Select Enabled to enable Option ROM support to boot the computer using a device installed on the slot specified by the user. The options are Disabled, Legacy , and EFI. Onboard NVMe1 Option ROM/Onboard NVMe2 Option ROM/Onboard Video Option ROM Select Enabled to enable Option ROM support to boot the computer using a device installed on the slot specified by the user. The options are Disabled and EFI .

VGA Priority Use this item to select the graphics device to be used as the primary video display for system boot. The options are Onboard and Offboard. Onboard LAN1 Option ROM/Onboard LAN2 Option ROM Use this option to select the type of device installed in LAN Port1 or LAN Port2 for system boot. The default setting for LAN1 Option ROM is PXE , and for LAN2 Option ROM is Disabled . Network Stack Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Unified Extensible Firmware Interface) for network stack support. The options are Enabled and Disabled . 7-21