Supermicro 5029P-E1CTR12L — Supermicro SuperStorage 5029P-E1CTR12L User's Manual PDF Download

SuperStorageSystem 5029P-E1CTR12L User's Manual 1.4 Server Chassis Features Control Panel The switches and LEDs located on the control panel are described below. The control panel is located on the left handle of the chassis. See Chapter 4 for details on the control panel connections. 1 2 3 6 4 7 5 8 Figure 1-1. Control Panel View 10 Control Panel Features Item Feature Description 1 Power Button The main power button is used to apply or remove power from the power supply to the server. Turning off system power with this button removes the main power but maintains standby power.

To perform many maintenance tasks, you must also unplug system before servicing 2 Reset Button The reset button is used to reboot the system 3 Power LED Indicates power is being supplied to the system power supply. This LED should normally be illuminated when the system is operating. 4 NIC2 LED Indicates network activity on LAN port 2 when flashing 5 Power Fail LED Indicates a power supply module has failed. The redundant power module will take over and keep the system running but the failed module will need to be replaced. This LED should be off when the system is operating normally.. 6 HDD LED Indicates hard drive activity when flashing.

7 NIC1 LED Indicates network activity on LAN port 1 when flashing 8 Overheat LED Indicates an overheat condition in the system.