SuperStorageSystem 5029P-E1CTR12L User's Manual Quick Reference Table Jumper Description Default Setting JWD1 Watch Dog Timer Pins 1-2 (Reset) LED Description Status Connector Description JVRM1 VRM SMBus Header (for programming use) 14 JBT1 CMOS Clear Open (Normal) JPSAS1 SAS HDD Enable/Disable Pins 1-2 (Enabled) (Default) JPS1 SAS 3.0 Enable/Disable Pins 1-2 (Enabled) JPG1 VGA Enable/Disable Pins 1-2 (Enabled) JPME2 ME Manufacturing Mode Pins 1-2 (Normal) DLE1 PCI-E 3.0 M.2 LED Blinking Green: Device Working LEDBMC BMC Heartbeat LED Blinking Green: BMC Normal LEDPWR Onboard Power LED Solid Green: Power On Blinking Green: SAS Active LEDSAS SAS Activity LED Solid Red:
SAS Error UID LED Rear UID LED Blue On: Unit Identified BT1 Onboard Battery COM1, COM2 COM Port, COM Header FAN1 ~ FAN5, FANA ~ FANC CPU/System Fan Headers (FAN1: CPU Fan) IPMI LAN Dedicated IPMI LAN Port _ I-SATA0~3, I-SATA4~7 Intel® PCH SATA 3.0 Ports (with RAID 0, 1, 5, 10) JD1 Power LED/Speaker Header (Pins 1-3: Power LED, Pins 4-7:
Speaker) JF1 Front Control Panel Header JIPMB1 4-pin BMC External I2C Header (for an IPMI Card) JL1 Chassis Intrusion Header JNVI2C1 NVMe I2C Header JNVME1, JNVME2 NVM Express (NVMe) PCI-Express 3.0 X4 Ports JOH1 Overheat LED Indicator JPI2C1 Power I2C System Management Bus (SMB) Header JPWR1 8-pin 12V CPU Power Connector JPWR2 24-pin ATX Power Connectors JRK1 Intel RAID Key Header JSD1, JSD2 SATA DOM Power Connectors JSTBY1 Standby Power Header JTPM1 Trusted Platform Module/Port 80 Connector