Chapter 3: Maintenance and Component Installation Assembling the Processor Package Attach the processor to the narrow processor clip to create the processor package. Caution: Exercise extreme caution when handling the CPU. Do not touch the underside of the CPU to avoid damaging it. Be sure to wear ESD gloves when handling components. 1. Locate pin 1 (A), which is the triangle on the top of the narrow processor clip. Also locate notch B and notch C on the processor clip. 2. Locate pin 1 (A), which is the triangle on the underside of the CPU. Also, locate notch B and notch C on the CPU as shown below. 3. Align pin 1 of the CPU with pin 1 of the narrow processor clip.
Once they are aligned, carefully insert the CPU into the processor clip by sliding notch B of the CPU into notch B of the processor clip, and sliding notch C of the CPU into notch C of the processor clip. 4. Examine all corners of the CPU to ensure that it is properly seated and secure on the processor clip. The processor package assembly is created.
CPU (Upside Down) w/CPU LGA Lands up C Align Notch C of the CPU and Notch C of the Processor Clip B Allow Notch C to latch on to CPU A Pin 1 C C Align Notch B of the CPU and Notch B of the Processor Clip B B CPU/Heatsink Package (Upside Down) Align CPU Pin 1 Allow Notch B to latch on to CPU A A Processor Package Assembly for the non-F Model Processors (with CPU mounted on the Processor Clip) 29