Chapter 6: BIOS CPU C State Control Autonomous Core C-State Enabling this setting allows the hardware to autonomously choose to enter a C-state based on power consumption and clock speed. The options are Disable and Enable. CPU C6 Report Select Enable to allow the BIOS to report the CPU C6 State (ACPI C3) to the operating system. During the CPU C6 State, the power to all cache is turned off. The options are Disable, Enable, and Auto . Enhanced Halt State (C1E) Select Enable to use Enhanced Halt-State technology, which will significantly reduce the CPU's power consumption by reducing it's clock cycle and voltage during a Halt-state. The options are Disable and Enable .
Package C State Control Package C State This feature allows the user to set the limit on the C State package register. The options are C0/C1 State, C2 State, C6 (Non Retention) State , C6 (Retention) State, No Limit, and Auto. CPU T State Control Software Controlled T-States Use this feature to enable Software Controlled T-States. The options are Disable and Enable. Chipset Configuration Warning: Setting the wrong values in the following features may cause the system to malfunc tion. North Bridge This feature allows the user to configure the following North Bridge settings: 69