Supermicro 5029P-E1CTR12L — Supermicro SuperStorage 5029P-E1CTR12L User's Manual PDF Download

Chapter 6: BIOS Memory Configuration Enforce POR Select POR (Plan of Record) to enforce POR restrictions on DDR4 frequency and volt­ age programming. The options are POR and Disable. Memory Frequency Use this feature to set the maximum memory frequency for onboard memory modules. The options are Auto , 1866, 2000, 2133, 2200, 2400, 2600, and 2666. Data Scrambling for NVDIMM Use this festure to enable or disable data scrambling for non-volatile DIMM (NVDIMM) memory. The options are Auto , Disable, and Enable. Data Scrambling for DDR4 Use this festure to enable or disable data scrambling for DDR4 memory. The options are Auto , Disable, and Enable.

tCCD_L Relaxation Select Enable to get TCDD settings from SPD (Serial Presence Detect) and implement into memory RC code to improve system reliability. Select Disable for TCCD to follow Intel POR. The options are Disable and Enable. Enable ADR Select Enable for ADR (Automatic Diagnostic Repository) support to enhance memory performance. The options are Disable and Enable. 2X REFRESH Use this feature to select the memory controller refresh rate to 2x refresh mode. The options are Auto and Enable. Memory Topology This feature displays DIMM population information.

Memory RAS Configuration Static Virtual Lockstep Mode Select Enable to run the system's memory channels in lockstep mode to minimize memory access latency. The options are Disable and Enable. 71