Supermicro 5049P-E1CTR36L — Supermicro SuperStorage 5049P-E1CTR36L User's Manual PDF

SuperStorageSystem 5049P-E1CTR36L User's Manual 2.3 Installing the System into a Rack This section provides information on installing the SC847BE1C chassis into a rack unit with the rails provided. There are a variety of rack units on the market, which may mean the assembly procedure will differ slightly. You should also refer to the installation instructions that came with the rack unit you are using. Identifying the Sections of the Rack Rails The 5049P-E1CTR36L includes a rack rail assembly in the rack mounting kit. Each assembly consists of three sections:

An inner chassis rail which secures directly to the chassis, an outer rail that secures to the rack, and a middle rail which extends from the outer rail. These assemblies are specifically designed for the left and right side of the chassis. Installing the Inner Rails 1. Place the inner rails on the side of the chassis aligning the hooks of the chassis with the inner rail holes. Make sure that the rail faces "outward" so that it will fit with the rack's mounting bracket. 2. Slide the rail toward the front of the chassis. 3. Secure the rail to the chassis with four screws as illustrated. 4. Repeat steps 1-3 for the other inner rack rail.

Rail Assembly (Shown with Rails Retracted) Outer Rail Middle Rail Locking Tab This Side Faces Outward Inner Rail Figure 2-1. Identifying the Rail Sections Note: Both front chassis rails and the rack rails have a locking tab, which serves two functions. First, it locks the server into place when installed and pushed fully into the rack (its normal operating position. In addition, these tabs lock the server in place when fully extended from the rack. This prevents the server from coming completely out of the rack when pulled out for servicing. 20