SuperStorageSystem 5049P-E1CTR36L User's Manual Installing The Inner Rails on the Chassis Installing the Inner Rails 1. Confirm that the left and right inner rails have been correctly identified. 2. Place the inner rail firmly against the side of the chassis, aligning the hooks on the side of the chassis with the holes in the inner rail. 3. Slide the inner rail forward toward the front of the chassis until the rail clicks into the locked position, which secures the inner rail to the chassis. 4. Secure the inner rail to the chassis with the screws provided. 5. Repeat steps 1 through 4 above for the other inner rail. Note:
Chassis pictured may vary slightly from the 5049P-E1CTR36L system chassis. Inner Rails 4 2 4 3 Figure 2-3. Installing the Server into a Rack Warning: In any instance of pulling the system from the rack, always use a rack lift and follow all associated safety precautions. Warning: When initially installing the server to a rack, test that the rail locking tabs engage to prevent the server from being overextended. Have a rack lift in place as a precaution in case the test fails. 22