Chapter 4: Motherboard Connections Chapter 4 Motherboard Connections This section describes the connections on the motherboard and provides pinout definitions. Note that depending on how the system is configured, not all connections are required. The LEDs on the motherboard are also described here. A serverboard layout indicating component locations may be found in Chapter 1. Please review the Safety Precautions in Appendix B before installing or removing components. 4.1 Power Connections Two power connections on the X11SPH-NCTF must be connected to the power supply. The wiring is included with the power supply.
24-pin Primary ATX Power (JPWR2) 8-pin Processor Power (JPWR1) Main ATX Power Connector The primary power connector (JPWR2) meets the ATX SSI EPS 12V specification. You must also connect the 8-pin (JPWR1) processor power connector to your power supply (see below). Required Connection Important: To provide adequate power to the motherboard, connect the 24-pin and the 8-pin power connectors to the power supply. Failure to do so may void the manufacturer's warranty on your power supply and motherboard.
43 ATX Power 24-pin Connector Pin Definitions Pin# Definition Pin# Definition 13 +3.3V 1 +3.3V 14 -12V 2 +3.3V 15 Ground 3 Ground 16 PS ON _ 4 +5V 17 Ground 5 Ground 18 Ground 6 +5V 19 Ground 7 Ground 20 Res (NC) 8 PWR OK _ 21 +5V 9 5VSB 22 +5V 10 +12V 23 +5V 11 +12V 24 Ground 12 +3.3V