Supermicro 5049P-E1CTR36L — Supermicro SuperStorage 5049P-E1CTR36L User's Manual PDF

Chapter 6: BIOS Mirror Mode This feature allows memory to be mirrored between two channels, providing 100% redundancy. The options are Disable , Mirror Mode 1LM, and Mirror Mode 2LM. UEFI ARM Mirror Select Enable to support the UEFI-based address range mirroring with setup option. The options are Disable and Enable. Memory Rank Sparing Select Enable to enable memory-sparing support for memory ranks to improve memory performance. The options are Disable and Enable. Correctable Error Threshold Use this item to specify the threshold value for correctable memory-error logging, which sets a limit on the maximum number of events that can be logged in the memory-error log at a given time.

The default setting is 100 . SDDC Plus One Single device data correction +1 (SDDC Plus One) organizes data in a single bundle (x4/x8 DRAM). If any or all the bits become corrupted, corrections occur. The x4 con­ dition is corrected on all cases. The x8 condition is corrected only if the system is in Lockstep Mode. The options are Disable and Enable. ADDDC Sparing Adaptive Double Device Data Correction (ADDDC) Sparing detects when the prede­ termined threshold for correctable errors is reached, copying the contents of the failing DIMM to spare memory. The failing DIMM or memory rank will then be disabled. The options are Disable and Enable.

Patrol Scrub Patrol Scrubbing is a process that allows the CPU to correct correctable memory errors detected on a memory module and send the correction to the requestor (the original source). When this item is set to Enable, the IO hub will read and write back one cache line every 16K cycles, if there is no delay caused by internal processing. By using this method, roughly 64 GB of memory behind the IO hub will be scrubbed every day. The options are Disable and Enable . Patrol Scrub Interval This feature allows you to decide how many hours the system should wait before the next complete patrol scrub is performed. Use the keyboard to enter a value from 0-24. The default setting is 24 . 75