Chapter 6: Advanced Chassis Setup 6-3 Rotating the Hard Drive Cage Figure 6-2. Rotating the Hard Drive Cage Release Tab (A) 2 3 HDD Cage (B) 1 4 In order to access and install components in the chassis interior, it is necessary to rotate the hard drive cage (B). This will provide sufficient room to install and configure the chassis components. Rotating the Hard Drive Cage 1. Power down the server, remove the power cord from the rear of the power supply. 2. Remove the side cover. (See page 6-2). 3. Lift the release tab (A). 4. Rotate the hard disk drive cage (B) outward. 6-3