S uper W orkstation 5037A-IL User's Manual Normally, the only visible Power-On Self-Test (POST) routine is the memory test. As the memory is being tested, press the key to enter the main menu of the AMI BIOS Setup Utility. From the main menu, you can access the other setup screens. An AMI BIOS identification string is displayed at the left bottom corner of the screen, below the copyright message. How to Start the Setup Utility Warning! Do not upgrade the BIOS unless your system has a BIOS-related issue. Flashing the wrong BIOS can cause irreparable damage to the system.
In no event shall Supermicro be liable for direct, indirect, special, incidental, or consequential damages arising from a BIOS update. If you have to update the BIOS, do not shut down or reset the system while the BIOS is updating. This is to avoid possible boot failure. 7-2 Main Setup When you first enter the AMI BIOS Setup Utility, you will enter the Main setup screen. You can always return to the Main setup screen by selecting the Main tab on the top of the screen. The Main BIOS Setup screen is shown below. 7-2 Main Advanced Event Logs Boot Security Save & Exit Set the Date. Use tab to switch between Data elements.
System Date [Wed 06/07/2012] System Time [16:49:50] Supermicro X9SAE Version 2.00 Build Date 05/31/2012 Processor Inte(R) Core(TM) i5-2320 CPU @ 3.00GHz : Select Screen Speed 3000 MHz : Select Item Physical Count 1 Enter: Select Logical Count 4 +/- : Change Opt. F1 : General Help System Memory F2 : Previous Values Size 2048 MB F3 : Optimized Defaults F4 : Save & Exit ESC : Exit Version x.xx.xxxx. Copyright (C) 2011 American Megatrends, Inc. System Date [Wed 06/07/2012] System Time [16:49:50] Supermicro X9SAE Version 2.00 Build Date 05/31/2012 Processor Inte(R) Core(TM) i5-2320 CPU @ 3.00GHz Speed 3000 MHz Physical Count 1 Logical Count 4 System Memory Size 2048 MB Set the Date.
Use tab to switch between Data elements. : Select Screen : Select Item Enter: Select +/- : Change Opt. F1 : General Help F2 : Previous Values F3 : Optimized Defaults F4 : Save & Exit ESC : Exit