S uper W orkstation 7045A-WT User's Manual Creating a RAID 10 (RAID 1+ RAID 0) a. Select Create RAID Volume from the main menu and press the key. The following screen will appear: b. Specify a name for the RAID 10 set and press . c. When the RAID Level item is highlighted, use the and the Arrow> keys to select RAID 10 (RAID1 + RAID0) and hit . d. When the Stripe Size is highlighted, use the , keys to select the stripe size from 4 KB to 128 KB for your RAID 10 and hit . The default setting is 64 KB. ( Note : For a server, please use a lower stripe size, and for a multimedia system, use a higher stripe size.) e.
When the RAID Volume Capacity item is highlighted, enter your RAID volume capacity and hit . The default setting is the maximum capacity allowed. f. Press when the Create Volume item is highlighted. A warning message will display. g. When asked "Are you sure you want to create this volume (Y/N)," press Y to create the RAID volume, or type N to go back to the Create Volume menu. C-6