Super Micro Computer, Inc. 7045A-WT — Super Micro 7045A-WT User Manual: Comprehensive Guide for System Integrators and Technicians

S uper W orkstation 7045A-WT User's Manual 1-3 Server Chassis Features The SuperWorkstation 7045A-WT is a scaleable server platform designed with today's most state-of-the-art features. The following is a general outline of the main features of the SC743SQ-865 server chassis. System Power The 7045A-WT features a single 865W power supply. This power supply unit has been designed to operate at a low noise level to make it ideal for use in a worksta- tion environment. Serial ATA Subsystem The SC743SQ-865 supports up to six 3 Gb/s Serial ATA drives. The SATA drives are hot-swappable units and are connected to a backplane that provides power and control. Note:

The operating system you use must have RAID support to enable the hot- swap capability of the Serial ATA drives. Front Control Panel The control panel on the SuperWorkstation 7045A-WT provides you with system monitoring and control. LEDs indicate system power, HDD activity, network activity, overheat condition and power supply failure. A main power button and a system reset button are also included. Note: the power supply fail LED is intended for use with redundant power supply systems and so is not needed for the 7045A-WT. I/O Backplane The SC743SQ-865 is an ATX form factor chassis that can be used as a tower or mounted in a 4U rackmount confi guration.

The I/O backplane provides seven expansion slots, two COM ports, a parallel port, four USB 2.0 ports, PS/2 mouse and keyboard ports, one or two (depending on the serverboard) Gigabit Ethernet port(s) and Line-In, Line-Out and Microphone jacks. Cooling System The SC743SQ-865 chassis has an innovative "Whisper-Quiet" cooling design that includes two 8-cm hot-plug PWM (Pulse Width Modulation) system cooling fans and a 9-cm chassis exhaust fan. The low noise level (~28 dB) makes the 7045A-WT ideal for a workstation environment. 1-4