Super Micro Computer, Inc. 7045A-WT — Super Micro 7045A-WT User Manual: Comprehensive Guide for System Integrators and Technicians

Appendix D: Adaptec HostRAID Setup Guidelines Adding a Bootable Array To make an array bootable 1. From the Main menu, select Manage Arrays. 2. From the List of Arrays, select the array you want to make bootable, and press and . 3. Enter Y to create a bootable array when the following message is displayed: "This will make all other existing bootable array non-bootable. Do you want to make this array bootable? (Yes/No):" Then, a bootable array will be created. An asterisk () will appear next to the bootable array (as shown in the picture below.) Deleting a Bootable Array To delete a bootable array 1. From the Main menu, select Manage Arrays. 2.

From the List of Arrays, select the bootable array you want to delete, and press and . (N ote : a bootable array is the array marked with an asterisk as shown in the picture above.) 3. When the following message is displayed: "The array is already marked bootable. Do you want to make this array as not bootable? (Yes/No)," Enter Y to delete a bootable array. The bootable array will be deleted and the asterisk will disappear. Note : Do not use the delete key to delete the bootable array. D-11