S uper W orkstation 7045A-WT User's Manual CPU Installation A black PnP cap is attached to 1. the load plate to protect the CPU socket. Press the load lever down and away from the retention clasp to release the load plate from its locked position. Load lever PnP cap Gently lift the load lever to open 2. the load plate. Use your thumb and your index 3. fi nger to hold the CPU at opposite sides. Align pin1 of the CPU (the corner 4. marked with a triangle) with the notched corner of the CPU socket. Load plate released Find the corner of the CPU that 5. has a semi-circle cutout below a gold dot (CPU key). This corner should be aligned with the cutout on the socket (socket key).
Once aligned, carefully lower 6. the CPU straight down into the socket. Do not drop the CPU on the socket, do not move the CPU horizontally or vertically and do not rub the CPU against any surface or any of the contacts, which may damage the CPU and/or contacts. 5-6