Chapter 6: Advanced Chassis Setup Figure 6-4. Removing a SATA Drive Carrier Figure 6-5. Mounting a SATA Drive in a Carrier Important! Use extreme caution when working around the SATA backplane. Do not touch the backplane with any metal objects and make sure no ribbon cables touch the backplane or obstruct the airfl ow holes. ! SATA Backplane The SATA drives plug into a SATA backplane. Six data cables (CBL-061L) and two SATA LED cables (CBL-0157L) need to be connected from the serverboard to the appropriate connectors on the backplane to support SATA six drives. You cannot cascade the SATA backplane. 6-7