Super Micro Computer, Inc. 7045A-WT — Super Micro 7045A-WT User Manual: Comprehensive Guide for System Integrators and Technicians

Chapter 7: BIOS sent (forwarded) to the BIOS DMI Event Log for user review. The options are Enabled and Disabled . PCI Fast Delayed Transaction Enable this function to improve the DMA data transfer rate for a PCI 32-bit multimedia card. The options are Enable and Disabled . Reset Confi guration Data If set to Yes, this setting clears the Extended System Confi guration Data- (ESCD) area. The options are Yes and No . Frequency for PCI-X#1~PCI-X#2 This option allows the user to change the bus frequency for the devices installed in the slot indicated. The options are Auto , PCI 33 MHz, PCI 66 MHz, PCI-X 66 MHz, PCI-X 100 MHz, and PCI-X 133 MHz. X Slot0 PCI-Exp.

x8, Slot1 PCI-X 100/133 MHz, Slot2 PCI-X 100/133MHz, Slot3 PCI 33 MHz, Slot4 PCI-Exp x16, Slot5 PCI 33 MHz, and Slot6 PCI-Exp x16 Access the submenu for each of the settings above to make changes to the following: Option ROM Scan When enabled, this setting will initialize the device expansion ROM. The options are Enabled and Disabled. Enable Master This setting allows you to enable the selected device as the PCI bus master. The options are Enabled and Disabled. Latency Timer This setting allows you to set the clock rate for Bus Master. A high-priority, high-throughout device may benefi t from a greater clock rate. The options are Default , 0020h, 0040h, 0060h, 0080h, 00A0h, 00C0h, and 00E0h.

For Unix, Novell and other Operating Systems, please select the option: other. If a drive fails after the installation of a new software, you might want to change this setting and try again. A different OS requires a different Bus Master clock rate . Large Disk Access Mode This setting determines how large hard drives are to be accessed. The options are DOS or Other (for Unix, Novelle NetWare and other operating systems). 7-11