S uper W orkstation 7045A-WT User's Manual Global Activation Throttle Select Enabled to enable the function of open-loop global thermal throttling on the fully buffered (FBD) memory modules and allow global thermal throttling to become active when the number of activate control exceeds a predefi ned number. The options are Enabled and Disabled . Force ITK Confi guration Clocking Select Enabled to confi gure FBD clock settings to support ITK testing. The options are Disabled and Enabled. Reserved Branch for ITK Test This feature allows the user to specify the memory branch number to be reserved for ITK testing. The default setting is Branch 1 .
Snoop Filter Select Enabled to eliminate snoop traffi c to the graphics port to greatly improve system performance when running graphics intensive applications. The options are Enabled and Disabled. Crystal Beach Features Select Enabled to use the Intel I/O AT (Acceleration Technology) to accelerate the performance of TOE devices. ( Note : A TOE device is a specialized, dedicated processor that is installed on an add-on card or a network card to handle some or all packet processing of this add-on card. For this motherboard, the TOE device is built inside the ESB 2 South Bridge chip.) The options are Enabled and Disabled. H. D.
Audio Control Select Enable to enable High-Defi nition Audio Control support. The options are Disabled, Enabled, and Auto . Route Port 80h Cycles to This feature allows the user to decide which bus to send debug information to. The options are Disabled, PCI and LPC . X Advanced Processor Options Access the submenu to make changes to the following settings. CPU Speed This is a display that indicates the speed of the installed processor. Frequency Ratio ( * Available if supported by the CPU.) The feature allows the user to set the internal frequency multiplier for the CPU. The options are: Default, x12, x13, x14, x15, x16, x17 and x18. 7-14