Chapter 7: BIOS X Console Redirection Access the submenu to make changes to the following settings. COM Port Address This item allows you to specify which COM port to direct the remote console to: Onboard COM A or Onboard COM B. This setting can also be Disabled . BAUD Rate This item allows you to set the BAUD rate for console redirection. The options are 300, 1200, 2400, 9600, 19.2K , 38.4K, 57.6K, and 115.2K. Console Type This item allows you to set console redirection type. The options are VT100, VT100,8bit, PC-ANSI, 7bit, PC ANSI , VT100+, VT-UTF8 and ASCII. Flow Control This item allows you to select the fl ow control option for the console. The options are: None, XON/XOFF, and CTS/RTS .
Console Connection This item allows you to decide how console redirection is to be connected: either Direct or Via Modem. Continue CR after POST Select on to continue with console redirection after the POST routine. The options are On and Off . 7-19