Preface Preface About This Manual This manual is written for professional system integrators and PC technicians. It provides information for the installation and use of the SuperWorkstation 7047GR- TRF. Installation and maintenance should be performed by experienced technicians only. The SuperWorkstation 7047GR-TRF is based on the SC747TQ-R1620B 4U/Tower rackmount chassis and the Super X9DRG-QF serverboard. Please refer to our web site for an up-to-date list of supported operating systems, processors and memory. Manual Organization Chapter 1:
Introduction The fi rst chapter provides a checklist of the main components included with the workstation system and describes the main features of the Super X9DRG-QF serverboard and the SC747TQ-R1620B chassis. Chapter 2: Workstation Installation This chapter describes the steps necessary to install the system into a rack and check out the workstation confi guration prior to powering up the system. If your workstation was ordered without the processor and memory components, this chapter will refer you to the appropriate sections of the manual for their installation. Chapter 3:
System Interface Refer to this chapter for details on the system interface, which includes the functions and information provided by the control panel on the chassis as well as other LEDs located throughout the system. Chapter 4: System Safety You should thoroughly familiarize yourself with this chapter for a general overview of safety precautions that should be followed when installing and servicing the system. Chapter 5: Advanced Serverboard Setup Chapter 5 provides detailed information on the X9DRG-QF serverboard, including the locations and functions of connectors, headers and jumpers. Refer to iii