Chapter 5: Advanced Serverboard Setup Rear UID LED The rear UID LED is located at LED3 on the backplane. This LED is used in conjunction with the rear UID switch to provide easy identifi cation of a system that might be in need of service. Refer to UID Switch on Page 2-17 for more information. 5-11 SATA Ports Serial ATA Ports There are six Serial ATA 3.0 Ports (I- SATA0~I-SATA5) and four SATA 2.0 ports (S-SATA 0~3) on the mother- board. These ports provide serial-link signal connections, which are faster than the connections of Parallel ATA. See the table on the right for pin defi nitions.
5-25 Serial ATA Pin Defi nitions Pin# Defi nition 1 Ground 2 TX P _ 3 TX N _ 4 Ground 5 RX N _ 6 RX P _ 7 Ground