Chapter 6: Advanced Chassis Setup 6-6 Installing Hard Drives in the Chassis Chassis hard drives are mounted in drive carriers to simplify their installation and removal from the chassis. These carriers also help promote proper airfl ow for the drive bays. Installing Hard Drives 1. Unlock and open the chassis cover. 2. Press the release button to extend the drive tray handle (see Figure 6-13). 3. Using the handle, pull the drive tray out by the handle. The drive is hot swappable; there are no cables to disconnect. 4. Remove the screws holding the drive tray to the dummy drive. Figure 6-13. Installing Hard Drives Release Button Drive Tray Handle 6-13