Supermicro SuperWorkstation 7048GR-TR — Supermicro SuperWorkstation 7048GR-TR User's Manual (Rev 1.0c) PDF Download

SUPERWORKSTATION 7048GR-TR User’s Manual The configuration data that determines the system parameters may be changed by entering the AMI BIOS Setup utility. This Setup utility can be accessed by pressing at the appropriate time during system boot. How To Change the Configuration Data Note : For AMI UEFI BIOS Recovery, please refer to the UEFI BIOS Recov­ ery User Guide posted @ http://www.supermicro.com/support/manuals/. Normally, the only visible Power-On Self-Test (POST) routine is the memory test. As the memory is being tested, press the key to enter the main menu of the AMI BIOS Setup utility. From the main menu, you can access the other setup screens.

An AMI BIOS identification string is displayed at the left bottom corner of the screen below the copyright message. Starting the Setup Utility Warning: Do not upgrade the BIOS unless your system has a BIOS-related issue. Flashing the wrong BIOS can cause irreparable damage to the system. In no event shall the manufacturer be liable for direct, indirect, special, incidental, or consequential damage arising from a BIOS update. If you have to update the BIOS, do not shut down or reset the system while the BIOS is being updated to avoid possible boot failure. 7-2 Main Setup When you first enter the AMI BIOS Setup utility, you will enter the Main setup screen.

You can always return to the Main setup screen by selecting the Main tab on the top of the screen. The Main BIOS Setup screen is shown below. The AMI BIOS main menu displays the following information: 7-2