Chapter 1: Introduction 1-3 Chassis Features The following is a general outline of the main features of the SC747BTQ-R2K02B chassis. The chassis includes a 2000 W high-efficiency, hoto-plug, redundant (1+1) power supply consisting of two power supply modules. In the unlikely event a power supply module fails, replacement is simple. System Power Hard Drive/Drive Bays The chassis features eight drive bays for SATA drives. These drives are hot -swappable. Once set up correctly, these drives can be removed without powering down the workstation. The SC747B chassis also provides three 5.25” peripheral drive bays for floppy drives, DVD/CD drives, or additional hard drives.
Control Panel The control panel on the workstation provides you with system monitoring and control. LEDs indicate system power, HDD activity, network activity, system overheat, UID and power supply failure. A main power button and a system reset button are also included. Cooling System The chassis accepts four system fans and two rear exhaust fans. System fans are powered from the serverboard. These fans are 4U high and are powered by 4-pin connectors. The system can be placed in a rack for secure storage and use. Mounting Rails (optional) 1-3