SUPERWORKSTATION 7048GR-TR User’s Manual Current QPI Link Frequency QPI Global MMIO Low Base/Limit QPI Global MMIO High Base/Limit QPI PCIe Configuration Base/Size Link Frequency Select Use this item to select the CPU Frequency. The options are 6.4 GB/s, 8.0 GB/s, 9.6 GB/s, Auto , Auto Limited. Link L0p Enable Select Enable for Link L0p support. The options are Enable and Disable. Link L1 Enable Select Enable for Link L1 support. The options are Enable and Disable. COD Enable (Available when the OS and the CPU support this feature) Select Enabled for Cluster-On-Die support to enhance system performance in cloud computing. The options are Enable, Disable, and Auto .
Early Snoop (Available when the OS and the CPU support this feature) Select Enabled for Early Snoop support to enhance system performance. The options are Enable, Disable, and Auto . Isoc Mode Select Enabled for Isochronous support to meet QoS (Quality of Service) require ments. This feature is especially important for Virtualization Technology. The options are Enable and Disable . Memory Configuration Enforce POR Select Enable to enforce POR restrictions on DDR4 frequency and voltage programming. The options are Enabled and Disabled. Memory Frequency Use this feature to set the maximum memory frequency for onboard memory modules.
The options are Auto , 1333, 1400, 1600, 1800, 1867, 2000, 2133, 2200, 2400, 2600, 2667, and Reserved (Do not select Reserved). 7-12