SUPERWORKSTATION 7048GR-TR User's Guide 2-5 Tower Configuration Instructions The 4U chassis is shipped with the tower top cover and feet pre-installed. To use the chassis as a desktop server, no other installation is required. Use the instructions in this section if you have converted the chassis for rack use and need to return the chassis to tower orientation. Add the Tower Top Cover Remove the Rack Mount Chassis Handles Add the Chassis Feet Figure 2-6. Adding Chassis Feet and the Top Cover Converting to Tower Configuration 1. Remove the rack mount handles. 2. Align the tower top cover post with the corresponding holes on the top of the chassis and place the cover on the chassis.
The cover should hang over the front of the chassis approximately one-half inch. 3. Slide the chassis cover toward the rear of the chassis to lock the cover into place. 4. Place each chassis foot in place. 5. Secure each foot to the chassis with the screws. 2-10