S UPER W ORKSTATION 7048GR-TR User's Manual 3-2 Control Panel Buttons The chassis includes two push-buttons that control power to the system. Power : The main power switch is used to apply or remove power from the power supply to the server. Turning off system power with this button removes the main power but maintains standby power. To perform many maintenance tasks, you must unplug system before servicing. Reset : The reset button is used to reboot the system 3-3 Control Panel LEDs There are five LEDs that provide status information about the system. HDD : Indicates IDE channel activity on the hard drive when flashing. NIC1 : Indicates network activity on LAN1 when flashing. NIC2 :
Indicates network activity on LAN2 when flashing. 3-2