Chapter 5: Advanced Serverboard Setup Installing an Expansion Card 1. Locate the release tab on the top of the PCI slot bracket. Gently apply pressure to the middle of the release tab to unlock the PCI slot bracket. 2. Pull the release tab upward. 3. Remove the screw holding the bracket in place and pull the bracket from the chassis. 4. Install your PCI card or other add-on card into the PCI slot bracket and serverboard. 5. Push the PCI bracket release tab down until it locks into place with an audible "click". 6. Secure the PCI card with the screw previously removed from the chassis. 7. Repeat this process with each PCI card you want to install into the chassis.
Press the Middle of the Release Tab Lift the Release Tab Figure 5-3. Expansion Card Port 5-11