Supermicro SuperWorkstation 7048GR-TR — Supermicro SuperWorkstation 7048GR-TR User's Manual (Rev 1.0c) PDF Download

Chapter 5: Advanced Serverboard Setup 5-8 Connector Definitions Power Connections A 24-pin main power supply connector(JPW1), two 8-pin CPU PWR connectors (JPW2/ JPW3) and a 4-pin PWR connector (JPW4) are provided on the serverboard. These power connectors meet the SSI EPS 12V specification. All these power connectors must be connected to your power supply to ensure adequate power supply to your system. See the table on the right for pin definitions. Caution : To avoid damaging your serverboard and components, please use a power supply that supports a 24-pin, two 8-pin and one 4-pin power connectors.

Be sure to connect the 24-pin and the 8-pin power connectors to your power supply for adequate power delivery to your system. The 4-pin connector is optional, however, Supermicro recommends that this connector also be plugged in for optimal power delivery. Required Connections Control Panel Connections Ground NMI 19 20 X X FP PWRLED 3.3 V NIC1 Link LED HDD LED NIC1 Activity LED ID_UID_SW/3/3V Stby NIC2 Link LED NIC2 Activity LED Blue+ (OH/Fan Fail/ PWR FaiL/UID LED) Red+ (Blue LED Cathode) Power Fail LED Ground Reset 3.3V Reset Button Ground PWR Power Button Figure 5-5.

Control Panel Header Pins 2 1 5-15 24-pin Main Power Connector Pin Definitions Pin# Definition Pin # Definition 13 +3.3V 1 +3.3V 14 -12V 2 +3.3V 15 COM 3 COM 16 PS ON _ 4 +5V 17 COM 5 COM 18 COM 6 +5V 19 COM 7 COM 20 Res (NC) 8 PWR OK _ 21 +5V 9 5VSB 22 +5V 10 +12V 23 +5V 11 +12V 24 COM 12 +3.3V 12V 8-pin PWR Pin Definitions Pins Definition 1~ 4 Ground 5~8 +12V 12V 4-pin PWR Pin Definitions Pins Definition 1/2 Ground 3/4 +12V