Supermicro SuperWorkstation 7048GR-TR — Supermicro SuperWorkstation 7048GR-TR User's Manual (Rev 1.0c) PDF Download

Chapter 6: Advanced Chassis Setup 6-3 Configuring Drives The default configuration includes eight hot-swap hard disk drives plus three full size drive trays for removable media drives or additional hard disk drives. The control panel/drive module includes three 5.25" drive bays under the front control panel. It can be set up in a variety of configurations to suit the user's needs. Three peripheral drives, such as CD, DVD, or floppy Additional fixed hard drives in an individual bay A combination of the above A mobile rack with five additional 3.5" hot-swap hard drives Configuring the 5.25" Drive Bays Installing a Hard Drive into a Drive Tray 1. Open the chassis cover. 2.

Locate the drive tray and pull the tray release tab for the slot. 3. Push the drive tray toward the front of the chassis (Figure 6-6). Drive Tray Release Tabs Figure 6-6. Remove Drive Tray 6-5