Supermicro SuperWorkstation 7048GR-TR — Supermicro SuperWorkstation 7048GR-TR User's Manual (Rev 1.0c) PDF Download

Chapter 6: Advanced Chassis Setup Adding Peripheral Drives to the Drive Bays 1. Open the chassis cover. Replace a drive tray with a peripheral drive. 2. Locate the release tab for the drive tray where you want to place the peripheral drive (Figure 6-8). 3. Push the drive tray toward the front of the chassis. Drive Tray Drive Rails Figure 6-8. Removing Rails from the Drive Tray 4. Remove the rails from the drive tray by removing two screws from each side. (Figure 6-7) 5. Attach the rails to a DVD drive, CD drive, floppy drive, or other peripheral. The rails should fit any standard sized peripheral. 6. Slide the drive into the chassis until it clicks into place. 6-7