Supermicro SuperWorkstation 7048GR-TR — Supermicro SuperWorkstation 7048GR-TR User's Manual (Rev 1.0c) PDF Download

Chapter 1: Introduction Chapter 1 Introduction 1-1 Overview The SuperWorkstation 7048GR-TR is comprised of two main subsystems: the SC747BTQ-R2K02B 4U/Tower chassis and the X10DRG-Q dual Intel Xeon processor serverboard. Please refer to our web site for information on operating systems that have been certified for use with the system ( www.supermicro.com ). In addition to the serverboard and chassis, various hardware components have been included with the workstation, as listed below: SATA accessories:

One HD backplane (BPN-SAS-747TQ) Eight 3.5" hard disk drive carriers (MCP-220-00094-0B) Three 5.25" drive trays (MCP-220-00073-0B) Cooling Four 92x38 mm middle fans (FAN-0138L4, FAN-0114L4) Two 80x38 mm rear exhaust fans (FAN-0082L4) Two 4U active CPU heatsinks (SNK-P0050AP4) Optional One 4U 17.2" width rack rail set (MCP-290-00059-0B) SC747B GPU / Add-on Card Dummy Assembly (2 Slots), Single Pack (MCP- 240-00096-0N) GPU Kit that includes two rear fans and one air shroud (MCP-320-74701-0N- KIT) HDD conversion tray, hotswap Gen. 6 3.5" to 2.5" (MCP-220-93801-0B) Note:

For your system to work properly, please follow the links below to download all necessary drivers/utilities and the user’s manual for your server. Product manuals: http://www.supermicro.com/support/manuals/ Product drivers and utilities: ftp://ftp.supermicro.com Product safety information: http://super-dev/about/policies/safety_information.cfm For support, email support@supermicro.com. 1-1