1-2 Appearance and Names of Parts 1-2 Appearance and Names of Parts 1 Top cover Overview Fin Digital Operator Front cover Main housing FREQ (FREQUENCY) adjuster Bottom cover •The size of the fin varies with the motor capacity. •There are two sizes depending on the motor capacity, but the fundamental structure is the same. •Remove the front cover when connecting the power supply, the motor, and the control signal. Connection to RJ45 Jack Connect the communications cable after opening the cover of the communications connector. Remove the front cover to switch communications. Refer to "Removing the Front Cover" (page 2- 6) for instructions on how to remove the front cover.
8k8k8k8 Communications connector (with cover) *The cover of the communications connector is removable. Remove the front cover to attach it. 1-3