3-7 Parameter List 3 Operation * 2nd control is displayed when SET (08) is allocated to one of from C001 to C005. 3-32 Parameter No. Function name Monitor or data range (Digital Operator) Default setting Changes during operation Unit Page Multi-function input terminals C001 Multi-function input 1 selection 00: FW (forward) 01: RV (reverse) 02: CF1 (multi-step speed setting binary 1) 03: CF2 (multi-step speed setting binary 2) 04: CF3 (multi-step speed setting binary 3) 05: CF4 (multi-step speed setting binary 4) 06: JG (jogging) 07: DB (external DC injection braking) 08: SET (2nd control) 09: 2CH (2-step acceleration/deceleration) 11: FRS (free-run stop) 12: EXT (external trip) 13:
USP (USP function) 15: SFT (soft lock) 16: AT (analog input switching) 18: RS (reset) 19: PTC (thermistor input) 20: STA (3-wire start) 21: STP (3-wire stop) 22: F/R (3-wire forward/reverse) 23: PID (PID enabled/disabled) 24: PIDC (PID integral reset) 27: UP (UP/DWN function accelerated) 28: DWN (UP/DWN function decelerated) 29: UDC (UP/DWN function data clear) 31: OPE (forced operator) 50: ADD (frequency addition) 51: F-TM (forced terminal block) 52: RDY (ready function) 53: SP-SET (special 2nd function) 64: EMR (emergency shutoff *1) 255: No function *1. The EMR is set forcibly with switch S8, not with parameters.
00 No ⎯ 4-43 C201 *2nd multi-function input 1 selection 00 C002 Multi-function input 2 selection 01 C202 *2nd multi-function input 2 selection 01 C003 Multi-function input 3 selection 18 C203 *2nd multi-function input 3 selection 18 C004 Multi-function input 4 selection 12 C204 *2nd multi-function input 4 selection 12 C005 Multi-function input 5 selection 02 C205 *2nd multi-function input 5 selection 02 C011 Multi-function input 1 operation selection 00: NO 01: NC 00 No ⎯ 4-44 C012 Multi-function input 2 operation selection 00 C013 Multi-function input 3 operation selection 00 C014 Multi-function input 4 operation selection 00 C015 Multi-function input 5 operation selection 00